Intelix S-V1AT Bedienungsanleitung PDF herunterladen (Seite 2)

Installation

1. Power off the source and destination devices which will be connected to the

baluns.

2. Verify the modular outlets and cross connects to which you will connect the S-

V1AT are configured properly and labeled appropriately to identify the circuit.

3. Verify the desired twisted pairs are not being used for other LAN or telephone

equipment.

4. Connect the S-V1AT to the video port of the source equipment.

5. Connect one end of the twisted pair cable to the S-V1AT.

6. Connect a compatible receive balun to the video port on the destination

equipment.

7. Connect the other end of the twisted pair cable to the second balun. The twisted

pair pinout on both the send and receive baluns should match.

8. Connect the 12V power supply to the S-V1AT. Verify the power LED is

illuminated.

9. Power on the source and destination equipment.

10. Verify picture quality. If necessary, adjust the Distance Adjust dipswitches on the

bottom of the unit.

Caution: Do not attempt to disassemble or alter the balun housin

. There are no

user-serviceable parts inside the unit. Doing so will void your warranty.

Caution: Do not connect the balun to a telecommunication outlet wired to

unrelated equipment. Doin

so ma

dama

e the unit or an

connected equipment.

Ensure all connected twisted pair cabling is straight-through (point-to-point).

Caution: To minimize the possibilit

of equipment dama

e from electrostatic

dischar

e (ESD), all source and destination equipment must be powered off durin

installation. This includes signal extenders, splitters, and switches.

Note: For your convenience, it is recommended that

ou uniquel

mark the ends

of the twisted pair cable before pulling them through a wall or conduit.

1 2 3 4

Keine Kommentare

Intelix S-V1AT Bedienungsanleitung Seite 2